VF TRACKSPORT BODY KIT & BONNETS

XAIR PERFORMANCE VF TRACKSPORT BODY KIT

We took delivery of our first VF in 2013, us and a lot of VE customers were disappointed with the new look. Gone was the well recognised VE Commodore Rear End, replaced by a Camry type look instead! To make things worse the lower section of the Rear Bumpers going up around underneath the license plate were unpainted plastic yet the front bumper inserts were all Gloss Black. This unpainted rear bumper made the VF look even higher in the rear...

By painting the bottom rear bumper gloss black and extending the factory painted area downwards plus adding the rear bumper extensions this automatically drags the visual rear lines of the car down much lower. Combine this with the higher bonnet and straight side skirts and you've got a totally different looking VF!

Choose from 2 Top Quality VF Bonnet designs;

Twin Nostril / Twin Exit Vent Bonnet

or ZL1 Camaro Style Bonnet (Unpainted or Genuine Carbon Fibre)

Side Skirts with Vent & Mesh

Rear Bumper Extensions + painting of the Bottom of the Rear Bumper.

Bonnets suit all VF Sedan, Wagon & Ute Series 1 and Series 2 including HSV.

Sideskirts and Rear Bumper Extensions suit VF Holden Sedan and Wagon only. 

Combine above to create a distinctive lower tough looking VF that's not a HSV Copy and no-one else has!

Vinyl Wrapping in any colour can be added to the Roof, Boot Spoiler and Side Skirts as shown. 

Painting and fitting can be arranged at the prices listed.

Note some cars with faded paint may need guards blended to match the bonnet colour at an extra cost.

VF TWIN NOSTRIL / TWIN EXIT VENT BONNET

Chunky side profile 30mm higher than factory creates a super tough look on any VF!

Side Vents at the top of each side of the bonnet bulge create an exit point for the air coming in through the front nostrils allowing a constant cool air flow and reduced underbonnet temperatures for greater engine performance.

Factory VF Bonnet Centre Hump incorporated into the raised top section in between the vents.

The Bonnet comes pre-installed with Polished Stainless Steel Latch ready to put straight on the car, after prep and paint the fit and finish is as good as the factory bonnet!

Mesh for Vents included.

Fits all VF Series 1 and Series 2 models.

Create a distinctive tough look for your VF that no-one else has!

VF ZL1 CAMARO STYLE BONNET

Brand new VF Bonnet with Camaro ZL1 Centre Hump!

Top Vents funnel cool air into the engine bay for reduced underbonnet temperatures and greater engine performance.

Unlike other cheap bonnets these have been developed from scratch to super tough standards for compliance in the Australian market. In Australia any aftermarket bonnet has to be certified as safe and registered against the cars serial number. 

The Bonnet comes pre-installed with Ball Joints and Latch ready to put straight on the car, after prep and paint the fit and finish is as good as the factory bonnet!

Mesh for Vents included.

Create a modern look for your VF no-one else has!

Fit all VF Series 1 and Series 2 Models.

VF TWIN NOSTRIL "T" STYLE BONNET

VF "T" Style Twin Nostril Bonnet.

Big Front Vents funnel cool air into the engine bay for reduced underbonnet temperatures and greater engine performance.

Unlike other cheap bonnets these have been developed from scratch to super tough standards for compliance in the Australian market. In Australia any aftermarket bonnet has to be certified as safe and registered against the cars serial number. 

The Bonnet comes pre-installed with Ball Joints and Latch ready to put straight on the car, after prep and paint the fit and finish is as good as the factory bonnet!

Mesh for Vents included.

Create a unique look for your VF no-one else has!

Fit all VF Series 1 and Series 2 Models.

VF SIDESKIRTS WITH VENT

Top quality Aftermarket Replacement Side Skirts for Holden VF Commodore Sedan & Wagon. Will not fit Ute. 

Factory Holden SS and SV6 Sideskirts feature a stepped in lip at the rear which make them look high. The Tracksport Sideskirts make the car look a lot lower due to no stepped in lip.

Vented Rear section comes complete with Mesh inserts.

Optional Tracksport Vinyl Graphics also available at prices as listed either shorter rear section only or full length with TRACKSPORT text as pictured. Custom Text also available no extra charge.

Fit and Finish after Prep, Primer and Painting is as good as Factory Sideskirts.

VF REAR BUMPER EXTENSIONS

If you've added the VF Tracksport Side Skirts then add the Rear Bumper Extensions to create a lower look all the way along the side of your car.

Construction material is Foam Rubber with self adhessive backing.

Will work with all SS, SV6, Evoke & Calais Rear Bumpers. 

Supplied in colour Flat Black once installed on the car the extensions can be painted with flexible primer then painted the same colour as the car as well as the lower sections of the Rear Bumper as pictured.

POWER & CUSTOM BADGES

XAIR custom Domex Raised Resin Power Badges which are a similar Font / Style to VE HSV Badges.

Available in Chrome and Satin Black - most Numbers in stock. Price is for any 3 Numbered Badge.

TRACKSPORT and XAIR Performance Vehicles Domex Badges as pictured are also in stock. Any other Badges such as the CLUBSPORT 450mm wide door badges in Satin Black can be made to order.

VINYL WRAP

Vinyl Wrapping certain parts can dramatically change the look of your car without the hassle and expense of paint.

Contrast coloured Roofs, Spoilers and Front Bumper Inserts etc make your car unique and different from standard.

Some of the higher spec VF's have chrome trims including door windows that stick out against certain paint colours. De-chroming of these parts including Badges with Vinyl Wrap makes for a much cleaner look.